Programming Switches "S1" + "S2 - Siemens FC700A Hardware Description

E3H020 C-Bus Gateway
13.7

Programming switches "S1" + "S2"

13.8 Programming switch "S3"
13.9 Programming switch "S5"
54
Siemens Building Technologies
Fire & Security Products
All switches are set to "on" at the factory. Switches must always be 'ON'.
Interface Line
RS232-1 "transmit"
"receive"
RS232-2 "transmit"
"receive"
To set the station address.
Function Programming switch S3
S3-1
Unused (via SWE700A) off
E3C011 used
unused
All switches are set to "off" at the factory
Interfaces RS232-1 and RS232-2, via terminal block "X2" (internal modem).
Interface
RS232-1
RS232–2 (Service port)
Set to "off" at factory
direct
unused
direct
unused
direct
unused
direct
unused
S3-2 S3-3 S3-4 S3-5
off off off off
Application
internal modem via terminal block "X2"
internal modem via terminal block "X2"
Programming switch
S1-1 S1-2 S2-1
on
off
on
off
on
off
S3-6 S3-7 S3-8 S3-9
on
off
Programming switch
S5-1 S5-2
off –
– off
007831_a_en_--.doc
S2-2
on
off
S3-10
03.2004