Parameterization, Flash Programming; Functions; Modules - Siemens FC700A System Planning Manual

26

Parameterization, Flash programming

26.1

Functions

26.2

Modules

Component Order-No.
B3D021 505259
- 505330
M3C700 A5Q00004798
Siemens Building Technologies
Fire & Security Products
Parameters are set for the FC700A fire detection system via the maintenance
PC by means of the software tool set 'SWE700A'.
Online-Help text
Flash programming is only relevant if B3Q700 is used as replacement for FC700A
New software is programmed by means of the 'Flash Tool' software. For the
modules B3Q700 the application software is now loaded into the Flash ROM via
the maintenance PC by means of the 'Flash Tool' software.
Details see Online-Help in SWE700A
B3Q700 (FT700A)
Control terminal
ST2
C-Bus
ST2
B3Q700 (FC700A)
Control unit
Load new application software (Flash) if necessary
–
Prepare/supplement structure of the system
–
Define user functions (system-specific)
–
Specify/correct user text
–
Detector localization
–
Data transfer of user functions to control unit
–
Description
Modem box for SWE700A (DUAL RS232 ITF)
Flat cable L=0,2m
USB Dongle
Parameterization, Flash programming
- for flash programming new application software
- download all system data
Modem box
RS232
B3D021
FC
I-Bus
E3M...
Notes
Complete with flat cable 20 conductors,
L=0.2m
As spare part
Key for SWE700A
Maintenance PC with
'SWE700A' + 'FlashTool'
software
59
007836_a_en_--.doc
03.2004