E3G070 Control Module "Universal - Siemens FC700A Hardware Description

18

E3G070 Control module "Universal"

18.1 Overview
18.2 Key data
Siemens Building Technologies
Fire & Security Products
Universal control module
2 contacts for remote transmission "Alarm and fault"
2 monitored control lines for alarm devices with EMI and over voltage protection
7 programmable control outputs / inputs
Monitored supply output for internal devices
Integrated ground fault monitoring
Card format 100mm x 200mm
I-Bus address is set at programming switch "S3"
"Remote transmission" contacts
"Alarm horn line"
Inputs
Supply output
Quiescent current at 24V
Terminal block X1 (20 terminals)
- mounted on module chassis
- for the connection of the prefabricated cable to
connection level, or
- for direct connection of the periphery
Card chassis
- mounted on module chassis
E3G070 Control module "Universal"
max. load 24W (60V 1A),
type choice of make / break contact
max. load 2A (24V), with EMI protection
max. load 40mA (24V), internal only
activation via volt-free contact
max. load 630mA (24V), internal only
25mA
E3G070
71
007831_a_en_--.doc
03.2004