B3Q700 Control Terminal To Fc/Ft - Siemens FC700A Hardware Description

20

B3Q700 Control terminal to FC/FT

20.1 Overview
20.2 Key data
Siemens Building Technologies
Fire & Security Products
240 x 128 dots
illuminated
yellow
Notes:
Operation and designation of indicators, see document no. 007835
Details for ordering see document no. 007836 'Planning'
Principle of the insertable inscription strips see page 77
Control terminal for the fire control unit FC700A
Becomes at the same time used as 'main-CPU'
For full system operating
Can be used for single or multi AREA operating
Emergency operating facility integrated
Flash-ROM 2MBx8Bit as program memory, programming via Flash-Tool (PC)
SRAM for user data and standard text
Selectable ground fault monitoring, detected via control module E3G070 (for ap-
plication details see chapter 6)
Operating access via password and/or key switch (option)
Insertable inscription strips in different languages
To be built into the housing of the control unit or remote located in separate
housing
Operating voltage
Quiescent current (illumination of the LCD inactive)
Alarm current
Maximum current (LCD backlight active + lamp test)
B3Q700 Control terminal to FC/FT
18...45V
DC
100mA (24V)
330mA (24V)
420mA (24V)
007831_a_en_--.doc
75
03.2004