FS-100 Installation & Operation Manual
PROGRAMMING THE CONTROL UNIT
MAIN BOARD JUMPER
Factory setting is shown.
P1 – Addressable Device Circuit Wiring Style
•
Style 6/7
•
•
Style 4
KEYPAD PROGRAMMING
Customized programming of the FS-100 control unit may be accomplished through a keypad included in
the control unit. A sixteen-key, telephone-style keypad mounts on the front panel within the cabinet. The
keypad may also be easily removed if desired.
699490) for detailed information of system programming.
PROGRAMMING SECURITY
The following levels of security protect the system from unauthorized use:
•
User – Locked Door
•
Maintenance – Locked Door and 4-digit Maint Password
•
Technician – Locked Door and 5-digit Tech Password
The User and Maintenance Levels are also accessible from the Remote LCD Annunciator.
P/N 315-699461
Technical Manuals Online! - http://www.tech-man.com
See the Siemens Programmer's Manual (P/N 315-
35