Installation Of Peripheral Devices; Installation Of Reactor 1 And Reactor 2 - Mitsubishi Electric FR-HC2-7.5K Instruction Manual

2.5

Installation of peripheral devices

2.5.1

Installation of reactor 1 and reactor 2

(1) Model name confirmation
Take caution as the appearances of the reactor 1 (FR-HCL21) and the reactor 2 (FR-HCL22) are very similar.
Reactor 1(FR-HCL21)
AC REACTOR
MODEL
FR-HCL21-XXX
SERIAL XXXXX
Reactor 2(FR-HCL22)
AC REACTOR
MODEL
FR-HCL22-XXX
SERIAL XXXXX
(2) Clearance
Because the reactor 1 (FR-HCL21) and the reactor 2 (FR-HCL22) generate heat, leave sufficient space around them.
5cm or more
(3) Installation place
Install the reactor 1 (FR-HCL21) and the reactor 2 (FR-HCL22) on nonflammable material. Direct installation on a
flammable material will cause a fire.
(4) Environment
Avoid places where the equipment is subjected to oil mist, flammable gases, fluff, dust, dirt, etc.
Install the equipment in a clean place or protect them from suspended substances.
10cm or more
5cm or more

Installation of peripheral devices

Check "MODEL" on the rating plates of the reactor 1
(FR-HCL21) and the reactor 2 (FR-HCL22).
2
23