Changing The Parameter Setting Value - Mitsubishi Electric FR-HC2-7.5K Instruction Manual

Hide thumbs Also See for FR-HC2-7.5K:
Table of Contents

Advertisement

Operation panel (FR-DU07-CNV)
3.1.3

Changing the parameter setting value

Changing example
1.
Screen at power-ON
The monitor display appears.
2.
Press
setting mode.
3.
Turn
4.
Press
" "(initial value) appears.
5.
Turn
value " ".
6.
Press
appears ............. Write disable error
appears.............. Write error during operation
For details, refer to page 126.
REMARKS
 The number of digits displayed on the operation panel (FR-DU07-CNV) is four. Only the upper four digits of values can be
displayed and set. If the values to be displayed have five digits or more including decimal places, the fifth or later numerals can
not be displayed nor set.
68
Change the Pr. 3 ROH terminal function selection setting.
Operation
to choose the parameter
(Pr. 3) appears.
until
to read the currently set value.
to change it to the set
to set.
· By turning
, you can read another parameter.
· Press
to show the setting again.
· Press
twice to show the next parameter.
· Press
twice to return the monitor to input current monitor.
is displayed... Why?
Display
Flicker ··· Parameter setting complete!!
The parameter
number read
previously appears.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fr-hc2-h7.5kFr-hc2

Table of Contents