(2)
Clearing procedure
POINT
Set Er.CL Fault history clear = "1" to clear the faults history.
1.
Screen at power-ON
The monitor display appears.
2.
Press
to choose the parameter
setting mode.
3.
Turn
until
appears.
4.
Press
to read the currently set value.
"
"(initial value) appears.
5.
Turn
to change it to the
setting value " ".
6.
Press
to set.
Operation
(faults history clear)
· Press
to read another parameter.
· Press
to show the setting again.
· Press
twice to show the next parameter.
Check and clear of the faults history
Display
The parameter
number previously
read appears.
Flicker ··· Faults history clear complete!!
4
135