Basic operation (factory setting)
Monitor mode (Input current monitor)
Parameter setting mode
Input voltage monitor
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
When a fault is displayed, the display shifts as follows by pressing
Input voltageat at the fault
(After Energization time, it goes back to a fault display.)
Pressing the setting dial shows the fault history number.
Operation panel (FR-DU07-CNV)
Bus voltage monitor
Display the present
Parameter and a setting value
Parameter write is completed!!
(Refer to page 134)
Bus voltage at the fault
Energization time at the fault.
: Input current at the