Mitsubishi Electric FR-HC2-7.5K Instruction Manual page 197

(2) Low Voltage Directive
We have self-confirmed our converters as products compliant to the Low Voltage Directive (Conforming standard EN
61800-5-1) and affix the CE marking on the converters.
Outline of instructions
 Do not use an earth leakage circuit breaker as an electric shock protector without connecting the equipment to the earth.
Connect the equipment to the earth securely.
 Wire the earth (ground) terminal independently. (Do not connect two or more cables to one terminal.)
 Use the cable sizes on page 31, 48 under the following conditions.
Surrounding air temperature: 40°C maximum
If conditions are different from above, select appropriate wire according to EN60204 ANNEX C TABLE 5.
 Use a tinned (plating should not include zinc) crimping terminal to connect the earth cable. When tightening the screw,
be careful not to damage the threads.
For use as a product compliant with the Low Voltage Directive, use PVC cable on page 31, 48.
 Use the moulded case circuit breaker and magnetic contactor which conform to the EN or IEC Standard.
 When using an earth leakage circuit breaker, use a residual current operated protective device (RCD) of type B (breaker
which can detect both AC and DC). If not, provide double or reinforced insulation between the converter and other
equipment, or put a transformer between the main power supply and converter.
 Use the inverter under the conditions of overvoltage category II (usable regardless of the earth (ground) condition of the
power supply), overvoltage category III (usable with the earthed-neutral system power supply, 400V class only) specified
in IEC664.
 Mount the converter (including all peripheral devices such as outside box, reactor 1, and reactor 2) to the enclosure
panel of IP54 or higher.
 On the input and output of the converter, use cables of the type and size set forth in EN60204 Appendix C.
 The operating capacity of the relay outputs (terminal symbols A, B, C) should be 30VDC, 0.3A. (Relay output has basic
isolation from the inverter internal circuit.)
 Control circuit terminals on page 34, 47 are safely isolated from the main circuit.
 Environment
Surrounding air
temperature
Humidity
Maximum Altitude
Details are given in the technical information "Low Voltage Directive Conformance Guide" (BCN-A21041-203). Please contact your sales
representative.
 Provide the Class T fuse or a fuse with faster shutoff speed, which is UL and cUL listed, for branch circuit protection.
Converter model
FR-HC2-7.5K
FR-HC2-15K
FR-HC2-30K
FR-HC2-55K
FR-HC2-75K
FR-HC2-H7.5K
FR-HC2-H15K
FR-HC2-H30K
FR-HC2-H55K
FR-HC2-H75K
FR-HC2-H110K
FR-HC2-H160K
FR-HC2-H220K
FR-HC2-H280K
FR-HC2-H400K
FR-HC2-H560K
190
Running In Storage
-10°C to +50°C -20°C to +65°C
90% RH or less 90% RH or less
1000m 1000m
Fuse type
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
UL Recognized High Speed
During Transportation
-20°C to +65°C
90% RH or less
10000m
Cat. No Manufacturer
170M1414 Bussmann
170M1416 Bussmann
170M2666 Bussmann
170M2669 Bussmann
170M2671 Bussmann
170M1411 Bussmann
170M1414 Bussmann
170M1416 Bussmann
170M2666 Bussmann
170M2667 Bussmann
170M2669 Bussmann
170M2671 Bussmann
170M3122 Bussmann
170M4117 Bussmann
170M5116 Bussmann
170M6117 Bussmann
Rating
50A, 700 Vac
80A, 700 Vac
160A, 700 Vac
315A, 700 Vac
400A, 700 Vac
25A, 700 Vac
50A, 700 Vac
80A, 700 Vac
160A, 700 Vac
200A, 700 Vac
315A, 700 Vac
400A, 700 Vac
550A, 700 Vac
700A, 700 Vac
1000A, 700 Vac
1400A, 700 Vac