2.11.2 Inverter parameter settings
When using the converter with the inverter, some inverter parameters must be set. The parameter settings differ by the
inverter series.
For the parameters and inverters not listed below, refer to the Instruction Manual of the inverter.
Inverter series
Pr. 30 Regenerative function selection
FR-A700
FR-F700(P)
FR-E700
FR-F700PJ
2 (when the automatic restart after
FR-D700
instantaneous power failure function is enabled)
Compatible inverter for the high power factor converter
2
0 (Initial value),
V/F control
Pr. 19 Base frequency voltage
Rated motor voltage
Other than V/F control
Pr. 83 Rated motor voltage
55
2