Exchangeable Rear Pto End Pieces; Maximum Transmitted Power - Zetor PROXIMA POWER Z90 2012 Operator's Manual

EXCHANGEABLE REAR PTO END
PIECES
The tractor is equipped with a fixed six-
spline end piece as standard.
The tractor may be optionally equipped
with a six- or twenty-one-spline exchang-
eable PTO end piece.
Exchange procedure:
1. Remove the locking ring (1) with
locking ring tongs.
2. By pulling in the arrow direction
remove the exchangeable end piece
(2).
3. Install the end piece in the reverse
order, paying increased attention to
the assembly of the locking ring (1).
DRIVE OF AGRICULTURAL MACHINES
E357
The end piece may only be ex-
changed
stopped.
The speed of the PTO and end
piece type must be selected with
regard to the prescribed speed of
the attached machine.
Shifting of 540 and 1000 or 540E
rpm is possible regardless of the
number of splines of the installed
end piece.
100

MAXIMUM TRANSMITTED POWER

with the engine
front
rear
PTO Transmitted
power
1000 rpm 60 kW
1000 rpm full engine power
540 rpm full engine power
540E rpm full engine power
E358