Zetor PROXIMA POWER Z90 2012 Operator's Manual page 12

POLICY OF CORRECT USE FOR PROXIMA POWER TRACTORS
STOPPING THE TRACTOR AND ACCELERATING IT AGAIN

Under ordinary operating conditions stop the tractor smoothly. Shortly before coming to a complete stop depress the
clutch pedal and stop the tractor with the brake pedal.

Move the reverse lever under the steering wheel to the neutral (N) position.

Release the clutch pedal completely.

To accelerate the tractor again, follow the instructions under the paragraph Accelerating the tractor in ordinary opera-
tion – the function of automatic acceleration.
GEAR SHIFTING

To shift the gears while the tractor is in motion, operate the engine clutch with the red clutch button on the gear lever.

While shifting, press and hold the red clutch button on the gear lever, release the gas pedal, unshift the gear, shift a differ-
ent gear, release the red button and then increase the rotation of the engine.

If allowed by operating conditions, use the function of power shift preset.
THE FUNCTION OF POWER SHIFT PRESET
The system of automatic gear change of multiplier is switched on by pre-selection multiplier controller on dashboard. If the con-
troller of multiplier pre-selection is "on" (the control on controller is lit), the gears of multiplier are shifted automatically depending
on the revolution of engine based on predefined values (engine revolutions).
11