Hydraulics Control Panel; Ways To Regulate Inner Hydraulic Circuit - Zetor PROXIMA POWER Z90 2012 Operator's Manual

HYDRAULICS CONTROL PANEL

Hydraulics control panel is located in the
area of the right wing.
Controlling the rear three-point hitch is
enabled by the inner hydraulic circuit (1).
Controlling outer hydraulic
(couplers) is enabled by outer hydraulic
circuit (2).
HYDRAULIC SYSTEM
P+11N001

WAYS TO REGULATE INNER HYDRAULIC CIRCUIT

Hydraulic system allows of three ways to regulate the lifting of the rear three-point
hitch:
Position regulation (img. 1) – the tool connected to the rear three-point hitch is
automatically kept in the same height (position) with regard to the tractor.
circuits Mixed regulation (img. 2) – a combination of position and power regulation. Suitable
mainly for tilling areas of different soil resistance.
Power regulation (img. 3) – the tool connected to the three-point hitch is
automatically being adjusted depending on changing soil resistance.
All the regulations can also be used when working with a tool equipped with a
support wheel in so-called free (floating) position.
105
P+11N002