Zetor PROXIMA POWER Z90 2012 Operator's Manual page 181

FRONT PTO
The inspection and filling plug of oil (1) is
situated on the front side of the front
PTO case.
Note: A plug or a hollow bolt is used de-
pending on the version.
The front PTO with the standard turning
direction is equipped with a hollow bolt of
the oil cooler hose instead of the inspec-
tion and filling plug. Perform the check
after removing the hollow bolt.
After unscrewing of the inspec-
tion screw the oil level must
reach the bottom edge of the in-
spection opening.
MAINTENANCE INSTRUCTIONS
F206
During the oil replacement the oil clean-
ing strainer (2) must be cleaned. The
cleaning strainer is accessible after the
disassembly of the locking ring and re-
moval of the cap.
180