Zetor PROXIMA POWER Z90 2012 Operator's Manual page 174

REASSEMBLY OF THE AIR CLEANER
ELEMENTS
When reassembling the air cleaner ele-
ments proceed in the reverse order.
Observe the following points during the
element reassembly:
- Make sure the contact surfaces are
clean.
- During the assembly the elements
must not get deformed and after instal-
lation they must not vibrate.
- After closing of the cleaner with the lid
the whole cleaner must be perfectly
leak-proof.
- After the maintenance of the dry air
cleaner ensure proper functioning of
the clogging indicator again.
MAINTENANCE INSTRUCTIONS
G715
173