Interrupt Control - ADLINK Technology cPCI-8168 User Manual

6.14 Interrupt Control

@ Name
_8168_int_control – Enable/Disable INT service
_8168_set_int_factor – Set INT factor
For Windows:
_8168_int_enable – Enable event
_8168_int_disable – Disable event
_8168_get_int_status – Get INT Status
_8168_link_interrupt – Set link to interrupt call back function
_8168_int_enableA – Enable bit axis event
_8168_int_disableA – Disable bit axis event
_8168_map_axis_event – Map interrupt factor to axis event
For DOS:
_8168_get_int_type – Get INT type
_8168_enter_isr – Enter interrupt service routine
_8168_leave_isr – Leave interrupt service routine
_8168_get_event_int – Get event status
_8168_get_error_int – Get error status
_8168_get_irq_status – Get IRQ status
_8168_not_my_irq – Not My IRQ
_8168_isr0~9, a, b – Interrupt service routine
@ Description
_8168_int_control:
This function is used to control interrupt generating from the host
PC. Once it is disabled, no interruptions will be generated from the
Host PC.
152 Function Library