Technical Specifications; Appendix A Technical Specifications - Baldor VS1SM Installation & Operating Manual

All specifications are subject to change without notice.
Input Ratings
Output Ratings
Protective Features
Environmental
Conditions
MN761
Voltage
Voltage range
Phase
Frequency
Impedance
Horsepower
Overload Capacity
Frequency
Voltage
Trip
Stall Prevention
External Output
Short Circuit
Electronic Motor Overload
Temperature
Cooling
Enclosure
Altitude
Humidity
Shock
Vibration
Storage Temperature
Duty Cycle

Technical Specifications

230
190-253
Single Phase
50/60Hz ±5%
1% minimum from mains connection
0.5-3 HP @ 230VAC
150% for 1 minute
0-400Hz
0 to maximum input voltage (RMS)
Over Voltage, Low Voltage, Over Current, Ground
Fault, Inverter Overheat, Motor Overheat, Output
Phase Open, Overload Protection, External Faults,
Communication Error, Loss of Speed Command,
Hardware Fault, Option Fault.
Over voltage suppression, over current suppression
LED trip condition indicators, 5 assignable logic
outputs, 2 assignable analog outputs
Phase to phase, phase to ground
2
Meets UL508C (I T)
-10 to 40 °C Derate 3% per degree C above 40 to
50 °C maximum ambient temperature
Forced air
IP20, NEMA 1 (optional)
Sea level to 3300 Feet (1000 Meters)
Derate 2% per 1000 Feet (303 Meters) above 3300
Feet
10 to 90% RH Non‐Condensing
1G
0.5G at 10Hz to 60Hz
‐20 to +65 °C
1.0
Appendix A
Technical Specifications A-1