Baldor VS1SM Installation & Operating Manual page 45

7.3 Function Group2
Parameter #
MN761
Continued
Access Parameter Name, Value Range, Description and Preset Value
RW Monitoring Item (Range:
0- Output Voltage [V]
1- Output Power [kW]
2- Torque [kgf-m])
Selects the item to be monitored/displayed in vOL parameter.
Preset Value:
RW Gain for Motor RPM (Range: 1-1000%)
Sets the display units motor speed (r/min) to mechanical speed (m/min).
Preset Value:
RW Software Version (Range: 0-10.0)
Displays the inverter software version.
Preset Value:
RW Second Motor Accel Time (Range: 0-6000sec)
Sets the acceleration time for the second motor.
Preset Value:
RW Second Motor Decel Time (Range: 0-6000sec)
Sets the deceleration time for the second motor.
Preset Value:
RW Second Motor Base Speed (Range: 30-400Hz)
Sets the rated frequency of the second motor. See motor nameplate.
Preset Value:
RW Second Motor Volts/Hz Pattern (Range:
0- Linear
1- Square
2- User Defined Volts/Hz Pattern)
Sets the Volts/Hz pattern for the second motor. (See F30 description).
Preset Value:
RW Second Motor Forward Torque Boost (Range: 0-15%)
Sets the of torque boost level for the second motor during forward run.
Set as a percentage of maximum Output Voltage.
Preset Value:
RW Second Motor Reverse Torque Boost (Range: 0-15%)
Sets the of torque boost level for the second motor during reverse run.
Set as a percentage of maximum Output Voltage.
Preset Value:
0
100
X.X
5.0 Parameter is only displayed when a Digital Input
(I20-I24)=12.
10.0 Parameter is only displayed when a Digital Input
(I20-I24)=12.
60.00 Parameter is only displayed when a Digital Input
(I20-I24)=12
0 Parameter is only displayed when a Digital Input
(I20-I24)=12
5 Parameter is only displayed when a Digital Input
(I20-I24)=12
5 Parameter is only displayed when a Digital Input
(I20-I24)=12
Parameter Descriptions 7-17