Baldor VS1SM Installation & Operating Manual page 25

Change Speed Reference from 0.0 to 30.0Hz: Factory setting for keypad speed reference is 0.0Hz.
Action
Apply Power
Press the A key twice to
move 2 digits to the left
Press the Y key to
increase the value to 3.
After the value change,
the display will flash for a
few seconds indicating
the new value.
View parameter F27: Use the jump code to quickly get to F27.
Action
Apply Power
Press the " key to go to
the next parameter group.
Press the Y key 26 times
or use the next steps.
or
Press the Y key 6 times
to increment to 7.
Press the A key to move
1 digits to the left
Press the Y key 2 times
to increment to 2.
Press Enter to go to F27.
MN761
Description
The present value is 5
and we want it to be 6.
Description
The jump code in
Function Group 1
Display
Press Enter to exit and
save changed value.
The new Speed
Reference is 30.0Hz.
Display
Press Enter to change the
value to 27.
Jump code is now 27.
Press Enter to view to
F27.
Press enter to view or
change setting.
Using the Keypad 6-5
Comments
Comments