Baldor VS1SM Installation & Operating Manual page 15

NPN
PNP
See Recommended Tightening
Torques in table 4‐1.
* Optional components not provided with control.
Notes:
1. See "Protective Devices" described
previously in this section.
2. Use same gauge wire for Earth ground
as is used for L1 and L2.
3. Metal conduit should be used. Connect
conduits so the use of a Reactor or RC
Device does not interrupt EMI/RFI
shielding.
See Recommended Tightening Torques in table 4‐1.
MN761
Figure 4‐2 Power Terminal Locations
VS1SM80P5/80P5-F, VS1SM81/81-F
L1
Figure 4‐3 Input Power Connections
Note 1
Note 3
Power Terminal Strip
Jumper Bar
L1 L2 P
U
VS1SM82/82-F, VS1SM83/83-F
L2 P P1
Jumper Bar
L1
*Fuses
L1
Baldor
Control
P1 N
V W
N U V W
Earth
L2 N
Note 2
L2 N
See Figure 3‐2
for ground location.
Power Wiring 4-3