Using The Keypad; Keypad Overview - Baldor VS1SM Installation & Operating Manual

6.1

Keypad Overview

Operator controls are shown in Figure 6‐1 and described in Table 6‐1.
The 5 Way Button that is used for parameter setting is only accessible when the cover is removed.
FWD Run LED
REV Run LED
Run Switch
Item Description
FWD FWD Run LED:
On during Forward Run.
REV REV Run LED:
On during Reverse Run.
DISPLAY 7 Segment LED Display:
Displays operation status and parameter information.
RUN Run Switch:
Press to issue a run command.
STOP/RST Stop / Reset Switch:
STOP: Stop the operation RST: Reset faults
POTENTIO- Speed Adjustment Potentiometer:
Adjusts the value of run frequency.
METER
5 WAY 5 Way Button: (Not visible with cover on.)
Y Navigate parameter lists or increase parameter value.
BUTTON
B Navigate parameter lists or decrease parameter value.
" Navigate parameter groups or move cursor to the right to change the parameter value.
A Navigate parameter groups or move a cursor to the left to change the parameter value.
F Set the parameter value or save the changed parameter value (Enter).
MN761
Figure 6‐1 Operator Controls
(Must remove cover to access)
Table 6‐1 Key Descriptions
Chapter 6

Using the Keypad

Display
Stop/Reset Switch
Speed Adjustment
Potentiometer
5 Way Button
Using the Keypad 6-1