CYP CPLUS-V8H8HP Operation Manual page 37

5. System Settings
This tab provides system information, power control, Ethernet
configuration options, system configuration backup/restore, and
firmware update functions.
• Power
Press this switch to toggle the unit's power between ON and OFF
(standby mode).
Note: While in standby mode the unit's WebGUI, Telnet and RS-232
controls are still active.
• Network
IP mode may be switched between Static IP or DHCP. In Static IP
mode the IP, netmask and gateway addresses may be manually set.
When in DHCP mode, the unit will attempt to connect to a local DHCP
server and obtain IP, netmask and gateway addresses automatically.
Please press "Save" after making any changes to the IP configuration
or mode.
Note: The unit's default IP address is 192.168.1.50. If the IP address is
changed then the IP address required for WebGUI/Telnet access will
also change accordingly.
• Download Current Configuration
The current system configuration, including routing and presets, may
be saved as an XML file to a PC. Click the "Download" button to save
the current system configuration to your local PC.
32