Rs-232 And Telnet Commands - CYP CPLUS-V8H8HP Operation Manual

6.8 RS-232 and Telnet Commands

6.8.1 General & System Commands
COMMAND
DESCRIPTION
HELP
Show the full command list.
?
Show the full command list.
SET FACTORY DEFAULT
Reset all settings to the factory
defaults. Unit will automatically
reboot.
SET FACTORY IPCONFIG DEFAULT
Reset Ethernet settings to the
factory defaults.
SET FACTORY OUT ROUTE DEFAULT
Reset all routing to the factory
defaults.
SET POWER N1
Turn the unit on or off (standby).
GET POWER
Show the current power state.
SET UART 1 BAUDRATE N1
Set the baud rate of the RS-232
port to N1.
9
VARIABLES
Available values for N1:
ON [Power On]
STANDBY [Standby Mode]
Available values for N1:
4800 [Baud Rate]
9600 [Baud Rate]
19200 [Baud Rate]
38400 [Baud Rate]
57600 [Baud Rate]
115200 [Baud Rate]