CYP CPLUS-V8H8HP Operation Manual page 21

6.8.4 EDID Commands
COMMAND
DESCRIPTION
GET ALL IN EDID MODE
Show the current "All Input" EDID
mode state.
SET ALL IN EDID N1
Set the EDID to use when the EDID
mode is set to "All Input".
GET ALL IN EDID
Show the EDID selected for use in
the "All Input" EDID mode.
VARIABLES
Available values for N1:
1 [Internal 1]
2 [Internal 2]
3 [Internal 3]
4 [Internal 4]
5 [Internal 5]
6 [Internal 6]
7 [User 1]
8 [User 2]
9 [User 3]
10 [User 4]
11 [User 5]
12 [User 6]
13 [User 7]
14 [User 8]
15 [Sink A]
16 [Sink B]
17 [Sink C]
18 [Sink D]
19 [Sink E]
20 [Sink F]
21 [Sink G]
22 [Sink H]
16