Lcd Menu - CYP CPLUS-V8H8HP Operation Manual

Next, press the key of the input (1~8) you wish to route to all
outputs. Finally, press "ENTER" to confirm your selection and
execute the routing change.
MENU: Press to enter the LCD menu, or to back out from menu
7
items.
ENTER: Press to confirm a selection within the LCD menu or to go
deeper into a menu item.
CANCEL: Press to cancel newly made input/output/preset routing
selections before they have been confirmed.
Plus (+)/IN: Press "+/IN" to navigate up within menus or to begin
8
the selection of an input for routing.
9 Minus (−)/OUT: Press "−/OUT" to navigate down within menus or to
begin the selection of outputs for routing.

6.4 LCD Menu

LEVEL 1
Video Setup
Drivers Setup
System Setup
Network Status
LEVEL 2
EDID Setup
Preset Setup
Downscale Setup
USB Power Supply
Temperature
Fan Ctrl.
Keypad Action
Mode
Firmware
Firmware Update
Factory Reset
[Info Display]
LEVEL 3
EDID Mode
Appoint Mode
EDID
All Mode EDID
1 ~ 8
A ~ H
A ~ H
[Info Display]
Auto Mode
Always On Mode
Standard Mode
User Mode
[Info Display]
Yes/No
Yes/No
LEVEL 4
Appoint Mode
All Mode
IN1 ~ IN8
IN1 ~ IN8
6