Panasonic KX-TDE100 Features Manual page 34

1.1 Incoming Call Features
** By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and
assigning Intercept Routing destinations to the Virtual PS, calls to these destinations will be redirected
to the Intercept Routing destination of the Virtual PS.
Programming Example
When extension 2001 is called from another extension or is the first destination
of an incoming trunk call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
Different intercept destinations can be programmed for each time mode (day/lunch/break/night).
[Available Intercept Destinations]
Wired Extension (PT/SLT/SIP Extension/ISDN Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
34 Feature Guide
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
2001
...
<Intercept Destination of Virtual PS>
Ext. No. of the Virtual PS
2001
...
Intercept Destination
"600" is an example of a
Floating Extension No.
for the External Pager
FWD Destination
600
...
Intercept Destination
Day Lunch Break
1001 1001 1001
... ... ...
...
Night
...
1001
...
...
Availability