: → 2.16.2 [10-2] DIL Table & Port Settings—DIL—DIL Destination—Day, Lunch, Break, Night
*
→ [450] DIL 1:1 Destination
Note
Tenant number and VPS trunk group number can also be assigned in the DIL table. Tenant number is
used to determine the time mode (day/lunch/break/night) for the corresponding trunk. VPS trunk group
number is used in Voice Mail DPT (Digital) Integration.
Explanation:
If a trunk call is received from trunk 01;
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to DIL destination, extension 100.
Programming Manual References
PC Programming Manual
2.16.2 [10-2] DIL Table & Port Settings—DIL
→ DIL Destination—Day, Lunch, Break, Night
→ Tenant Number
→ VM Trunk Group No.
PT Programming Manual
[421] BRI DIL/DDI/MSN Selection
[450] DIL 1:1 Destination
Feature Guide References
1.1.1.5 Calling Line Identification (CLI) Distribution
2.2.3 Tenant Service
2.2.4 Time Service
3.1 Capacity of System Resources
1.1 Incoming Call Features
Feature Guide
23