Panasonic KX-TDE100 Features Manual page 293

• Compatible PSs
The following PSs can be assigned to PS ring groups:
– KX-TD7580
– KX-TCA155
– KX-TCA255
– KX-TCA256
– KX-TCA355
– KX-TD7680
– KX-TD7684
– KX-TD7690
– KX-TD7694
• Incoming trunk call information is shown on a PS display when a trunk call arrives at a PS ring group
which the PS joins. The display information can be selected on a PS ring group basis through system
programming: Called Party's Name/Number or Caller's Name/Number.
• Calling Multiple PSs Simultaneously
There are two methods to call multiple PSs simultaneously using the floating extension number
assigned to the following groups:
Method
Incoming Call
Distribution Group
PS Ring Group
• When a PS joins a PS ring group, the following personal settings are disregarded:
a)
When the PS ring group is called:
– Delayed Ringing
– Display information when the incoming calls arrive;
The settings (e.g., display priority) are disregarded.
– The setting which is assigned on the PS (e.g., FWD)
– The status of the PS (e.g., busy)
b)
Log-in/log-out setting (from the PS ring group/from the incoming call distribution group which the
PS ring group belongs to). (→ 1.2.2.7 Log-in/Log-out)
Note
Log-in/log-out setting of the PS ring group from the incoming call distribution group is also
disregarded.
Assignment
Assign all desired PSs to
one incoming call
distribution group, and set
the group call distribution
method for the group to
"Ring".
→ 1.2.2 Incoming Call
Distribution Group Features
Assign all desired PSs to
one PS ring group.
1.25 Portable Station (PS) Features
Merit
All PS users in the The CS may often
group can use the be busy as each PS
Log-in/Log-out in the group uses
feature, Wrap-up one channel when a
feature, and ICD call arrives at the
Group button for the group.
group.
Only one channel is PS users in the
used when a call group cannot use
arrives at the group. the Log-in/Log-out
and Wrap-up
features.
Demerit
Feature Guide 293