Panasonic KX-TDE100 Features Manual page 156

1.10 Automatic Route Selection (ARS) Features
5.
Carrier Table
A specified number of carriers can be programmed. Assign the following items for each Carrier Table:
→ 2.14.6 [8-5] Carrier—Carrier
Carrier Name
→ 2.14.6 [8-5] Carrier—Carrier—Carrier Name
→ [350] ARS Carrier Name
Removed Number of Digits
dialled number.
→ 2.14.6 [8-5] Carrier—Carrier—Removed Number of Digits
→ [352] ARS Removed Number of Digits for Carrier Access
Carrier Access Code
→ 2.14.6 [8-5] Carrier—Carrier—Carrier Access Code
→ [353] ARS Carrier Access Code
Trunk Group
→ 2.14.6 [8-5] Carrier—TRG 01–TRG 64
→ [351] ARS Trunk Group for Carrier Access
Modify Command
→ 2.14.6 [8-5] Carrier—Carrier—Modify Command
[Command Explanation]
Command
156 Feature Guide
Assignment
7
: Assign the carrier name.
8
: Assign the number of digits to remove from the beginning of the user-
9
: Assign the code to access the carrier.
10
: Assign the trunk groups which connect to each carrier.
11
12 : Assign the commands to modify the dialled number to access the carrier.
Number Add the number.
C Add the Carrier Access code.
P Analogue Line: Insert a pause.
ISDN/T1/E1 Line: Insert a pause and change to tone (DTMF) signal.
A
Add the Authorisation code for a tenant ( ).
G
Add the Authorisation code for a trunk group ( ).
I
Add the Itemised Billing code ( ).
H Add the dialled number after the digits are removed (Home position).
Description
13
14
15