Panasonic KX-TDE100 Features Manual page 286

1.24 Voice Message Features
123-4567
Tenant 1
(Company A)
8.
Caller's Identification Notification to the VPS
When receiving a trunk call, the PBX sends the caller's identification number/name to the VPS.
9.
DID Number Notification to the VPS
When receiving a trunk call with a DDI/DID number or an MSN, the PBX sends the DDI/DID number or
MSN to the VPS. The number will be sent to the VPS even if the call reaches the VPS after redirection
by, for example, the Intercept Routing feature.
10.
Status Notification to the VPS
After the call is redirected by the VPS, the PBX sends the status of the redirected extension (e.g., busy)
to the VPS.
11.
Paging by the VPS
The VPS can perform the Paging feature using the recorded message. (→ 1.15.1 Paging)
12.
Live Call Screening (LCS)
A PT or PS user can monitor his own mailbox while a caller is leaving a message and, if desired, answer
the call by pressing the LCS button. When the caller is leaving a message in the mailbox, monitoring
can be carried out in two ways: each PT user can choose which through personal programming (Live
Call Screening Mode Set). PS users cannot choose the way: only Private mode is available for them.
Hands-free mode: The user can monitor the call automatically through the built-in speaker.
Private mode: The user will hear a warning tone. To monitor the call, the user goes off-hook with the
handset, MONITOR button, or SP-PHONE button. However, PS users cannot monitor the call with the
speakerphone.
→ 2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 4—LCS Answer Mode
13.
Two-way Recording into the VPS
A PT user can record a conversation into his own mailbox or another mailbox, while talking on the
phone.
286 Feature Guide
Trunk Call
Sends the following information:
· VPS Trunk Group: 1
· Time mode: Day
Intercept
(Floating Extn. No. 500)
Extn. 105
Trunk Call
PBX
Sends the following information:
· VPS Trunk Group: 2
· Time mode: Night
VPS
123-2468
Tenant 3
(Company B)
Extn. 102