Panasonic KX-TDE100 Features Manual page 207

Pure ip-pbx
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

→ 2.10.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—Intercept Destination—
When Called Party is Busy
DISA Intercept Routing—DND
If the destination called by the outside party is in DND mode and Idle Extension Hunting is not available,
one of the following can be selected through system programming:
a)
Busy Tone: The caller will hear a busy tone.
b)
Enable: DND will redirect the call to the preprogrammed destination on an extension basis.
c)
OGM: An outgoing message (OGM) will be sent to the caller. The message for DND mode can be
assigned for each outgoing message (OGM) which has a DISA floating extension number.
→ 2.11.3 [5-3-1] Voice Message—DISA System—DISA Intercept—Intercept when destination through
DISA sets DND
DISA Intercept Routing—No Answer
If a destination is not available to answer a DISA call within a preprogrammed time period (DISA Intercept
time) after the call is reached, the call will be redirected to the programmed destination by the Intercept
feature.
If the intercept destination is not available to answer the call within a preprogrammed time period (DISA
Disconnect Time after Intercept) after the DISA Intercept time expires, the call will be disconnected.
2.8.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
→ DISA—Intercept Timer—Day, Lunch, Break, Night
→ DISA—Disconnect Timer after Intercept
→ 2.10.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—Intercept Destination—
When called party does not answer—Day, Lunch, Break, Night
→ 2.10.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination—Intercept Destination—
When called party does not answer—Day, Lunch, Break, Night
→ [604] Extension Intercept Destination
Walking COS Through DISA
If the caller performs Walking COS (extension number and PIN entry) while hearing a DISA message, the
security mode can be temporarily changed to No Security mode (→ 1.9.5 Walking COS). After performing
Walking COS, the following features are available, using the settings of the specified extension:
Intercom call
TIE line call
Trunk call
Call Forwarding (FWD)/Do Not Disturb (DND) setting (→ 1.3.1 Call Forwarding (FWD)/Do Not
Disturb (DND))
Incoming Call Distribution Group Log-in/Log-out (→ 1.2.2.7 Log-in/Log-out)
Absent Message setting (→ 1.19.2 Absent Message)
Extension Dial Lock (→ 1.9.3 Extension Dial Lock)
Time Service Switching Mode (→ 2.2.4 Time Service)
DISA Automatic Walking COS
Registered outside destinations such as cellular phones can be automatically recognised as PBX
extensions when calling through DISA. When the Caller ID of a received trunk call matches an entry in the
System Speed Dialling Table, the calling telephone is given Walking COS authorisation as assigned to the
1.17 Optional Device Features
Feature Guide
207

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde200

Table of Contents