Application Settings; Kwh Pulse Output - Vacon 100 hvac Applications Manual

VACON · 186
10.16

APPLICATION SETTINGS

P3.17.1 PASSWORD (ID 1806)
Use this parameter to set the administrator password.
P3.17.2 C/F SELECTION (ID 1197)
Use this parameter to set the temperature measuring unit.
The system shows all the temperature-related parameters and monitoring values in the set
unit.
P3.17.3 KW/HP SELECTION (ID 1198)
Use this parameter to set the power measuring unit.
The system shows all the power-related parameters and monitoring values in the set unit.
P3.17.4 FUNCT BUTTON CONFIGURATION (ID 1195)
Use this parameter to set the values of the FUNCT button.
This parameter tells which selections show when you push the Funct button.
Local / Remote
•
Control Page
•
Change Direction (only visible in keypad control)
•
10.17

KWH PULSE OUTPUT

P3.18.1 KWH PULSE LENGTH (ID 15534)
Use this parameter to set the length of kWh pulse in milliseconds.
P3.18.2 KWH PULSE RESOLUTION (ID 15533)
Use this parameter to set the kWh interval between triggering of pulses.
10
PARAMETER DESCRIPTIONS
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205