Vacon 100 hvac Applications Manual page 67

PARAMETERS MENU
Table 16: Digital output settings on standard I/O board
Index Parameter
P3.5.3.2.1 Basic RO1 Function
P3.5.3.2.2 Basic R01 ON Delay
P3.5.3.2.3 Basic R01 OFF Delay
P3.5.3.2.4 Basic R02 Function
P3.5.3.2.5 Basic R02 ON Delay
P3.5.3.2.6 Basic R02 OFF Delay
P3.5.3.2.7 Basic R03 Function
P3.5.3.2.8
P3.5.3.2.9
THE DIGITAL OUTPUTS OF THE EXPANDER SLOTS C, D AND E
Shows only the parameters for the outputs on option boards in slots C, D and E. Make the
selections as in Basic RO1 Function (P3.5.3.2.1).
This group or these parameters are not visible if there are no digital outputs in slots C, D or
E.
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
Min Max Unit
0 41
0.00 320.00 s
0.00 320.00 s
0 41
0.00 320.00 s
0.00 320.00 s
0 41
Default ID Description
29 = Motor 3 control
30 = Motor 4 control
31 = Motor 5 control
32 = Reserved
33 = Reserved
34 = Maintenance
alarm
2 11001
35 = Maintenance fault
36 = Thermistor fault
37 = Motor switch
38 = PreHeat
39 = kWh pulse output
40 = Run Indication
41 = Selected Param.
Set
0.00 11002
0.00 11003
3 11004 See P3.5.3.2.1.
0.00 11005 See P3.5.3.2.2.
0.00 11006 See P3.5.3.2.3.
1 11007 See P3.5.3.2.1.
VACON · 67
5