Vacon 100 hvac Applications Manual page 31

USER INTERFACES
GOING INTO THE CONTROL PAGE
It is easy to monitor the most important values in the Control page.
1 Anywhere in the menu structure, push the Funct
button.
2 To make a selection of the Control page, push the
arrow buttons Up and Down. Go in with the OK
button. The control page opens.
3 If you use the Local control place and the keypad
reference, you can set P3.3.6 Keypad Reference
with the OK button.
4 To change the digits in the value, push the arrow
buttons Up and Down. Accept the change with the
OK button.
See more information about Keypad Reference in Chapter 5.3 Group 3.3: Control reference
settings. If you use other control places or reference values, the display shows the frequency
reference, which you cannot edit. The other values on the page are Multimonitoring values.
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
STOP READY
Main Menu
ID:
Monitor
( 12 )
Parameters
( 21 )
Diagnostics
( 6 )
STOP READY
Choose action
ID:1805
Change direction
Control page
Local/Remote
READY
STOP
Keypad Reference
ID: 184
0.00Hz
Output Frequency Motor Torque
0.00Hz
Motor Current Motor Power
0.00A
STOP READY
Keypad Reference
ID: 168
0.00Hz
Output Frequency Motor Torque
0.00Hz
Motor Current Motor Power
0.00A
VACON · 31
I/O
M1
Keypad
Keypad
0.00%
0.00%
Keypad
0.00%
0.00%
3