Table of Contents
Advertisement
Important Safety Information
○
...... The performance may deteriorate significantly.
Prohibited
installation
○ When the instrument is not in use, unplug the power cord.
...... Failure to observe the above may result in electric shock, fire or
○ Install the instrument where you can pull the power cord out anytime.
○ When using the power cord, make sure that there is no dust on the
...... Failure to observe the above may result in fire.
○ When using a power cord or an AC adapter, make sure to use the one
...... Other commercially available cords may have different voltage
○ While charging the battery with the instrument, do not remove the
...... Failure to observe the above may result in battery leakage and
○ Remove the battery when the instrument will not be used for an
......Failure to observe the above may result in battery leakage.
Handle property
○ Do not use or leave the instrument in an environment exceeding or
...... The instrument may not function properly beyond the specified
Prohibition
○ Do not wipe the instrument with volatile solvents.
...... The case of the main unit may deform or deteriorate. Use a
Prohibition
○ Do not subject the instrument to strong shocks. Do not place heavy
...... Failure to observe the above may cause malfunction or damage to the
Prohibition
Do not use this instrument in an ambient temperature of 35 ℃ or
greater.
Also, dielectric degradation may occur, which may result in short
circuit or fire.
damage to the internal circuitry.
power plug.
The AC outlet must be within the specified power
requirement of 100-240V.
provided with this instrument.
specifications and polarity, which could result in short circuit, fire or
damage to the instrument.
battery from the instrument.
damage to the circuitry.
extended period of time.
Also, do not leave a discharged battery inside the instrument.
falling below the specified temperature/RH levels for the instrument.
The instrument should not be exposed to direct sunlight for a prolonged
period of time.
operable environment (
soft dry cloth to remove stains. If stains persist, soak the cloth in
neutral detergent or water and wipe the instrument with the cloth.
Never use volatile solvents such as thinner or benzene.
objects on the instrument.
instrument.
WARNING
CAUTION
10～35℃, 20～85％RH, with no condensation）
iii
Advertisement
Table of Contents
