Table of Contents
Advertisement
3. Operation Procedures
【Caution】
If two (2) or more measurements are conducted within one (1) minute and
the measurement results are stored in internal memory, only the newest
result will be stored.
Cursor
The graph cursor is an orange line on the graph.
Page Selection
Numeric Data
Charging level of
Corona current
*When the charging level of the corona
current
is
not
measurement cannot be started even if
the START button is tapped.
In the process of a measurement,
the corrected results of raw data
are displayed in the graph.
To stop a measurement, tap the STOP
button. Once a measurement stops,
the data will be stored in memory, and
the screen will be changed to the
REDUCTION screen.
When a measurement finishes, the
screen will switch to the REDUCTION
screen.
Tap the graph to move the cursor to the
desired position on the graph.
The data selected by the graph cursor is
linked to the numeric data in the right.
If you tap numeric data, the graph
cursor will move to the relevant position.
19
at
maximum,
a
Advertisement
Table of Contents
