Table of Contents
Advertisement
16
3. Operation Procedures
When a measurement finishes, the
screen will turn to the
REDUCTION
screen.
In the REDUCTION screen, the
results of the compensation calculation
will be displayed. The unit of
concentration is dN/dLogDp.
Tap the graph to move the cursor to the
desired position on the graph.
The diameter selected by the graph
cursor is displayed in the upper right of
Cursor
Page selection
Numeric data
the graph. If you move the cursor, the
value will change.
In the diameter pointed by the graph cursor, data area is
displayed in red; the other area is displayed in green.
If the number of scans is set as multiple
in the setting of [No. of Scans], the
measurement results will be displayed
over multiple pages.
When there are
multiple graph pages, tap the page
selection to display the page selection
dialog box. Input the page number you
wish to display.
The selectable page
range is shown on the title bar of the
dialog box.
Tap the [Prev] button to return to the
SCAN screen.
Selectable page range
Advertisement
Table of Contents
