Installing The Main Structure; Operation Directions; Communication And Supplying Power With The Ac Adapter - Kanomax 6710 Instruction Manual

Note The support poles and the portable handle should be disassembled before
packing the capture hood in the carrying case to avoid damaging the case.

3.4 Installing the Main structure

To install the Main structure
and gently push the top of the panel backwards
reverse the procedure.
4.

Operation directions

4.1 Communication and Supplying Power with the AC Adapter

Connect the main structure to a PC (refer to figure
The main structure is connected to a PC.
To power the instrument with the optional AC adapter, refer to figures
adapter is connected and batteries are installed, power will be supplied from the AC adapter
The specification of the AC adapter is: I/P: AC 110-240V 50/60 HZ
The AC adapter supplies power for the main structure.
structure.
www.lazodecontrol.com
, set the bottom of the panel in the holder on the unit base
until it locks into place. To remove it, simply
).
The AC adapter also supplies power for the
Capture hood.
5
+51 960 810 089
and When the AC
.
.
O/P: DC 5V/ 2A
ventas@lazodecontrol.com