Table of Contents
Advertisement
25
3. Operation Procedures
· System Settings
In the System Settings window, you
can configure the settings for the LCD
backlight.
[Brightness] allows you to set the
brightness of the backlight.
Set the
brightness by moving the slider from
side to side.
[Power saver time-out] allows you to
set the time that must elapse before
the backlight will automatically turn
off (if the drive is not in use).
From the list box, tap the time you
wish to select.
[Stylus Adjustment]
By tapping the [Stylus adjustment]
button on the System Settings
window, the [Stylus Properties]
window for stylus adjustment will be
displayed.
Tap the [Recalibrate] button to
readjust the stylus.
A "＋" mark will appear five (5) times.
Please tap the center of each "+"
marks with the stylus with the stylus.
After tapping the center of the "+"
mark five (5) times, the screen shown
on the left appears and you can tap
anywhere on the window to save the
new stylus settings.
Advertisement
Table of Contents
