Select And Transfer All Data - FENDT varioguide Operator's Manual

7.4.3.1 Select and transfer all data

Procedure
Using the soft key, select the data to be
1.
transferred:
(A) Field data
(B) Implement data
Press the soft key (L); all data is transferred
2.
from the USB stick to the terminal.
NOTE:
If there is identical data on the terminal, a
popup appears and asks whether the existing
file should be replaced or renamed.
NOTE:
The transferred data can then be seen in the
bottom display.
VarioGuide
438.020.070.012
Fig. 37
L
Fig. 38
7. Start-up
A
B
H
89