Transfer Implement And Field Data From The Usb Stick To The Terminal - FENDT varioguide Operator's Manual

Press the soft key (K); all data is transferred
2.
to the USB stick.
NOTE:
If there is identical data on the USB stick, a
popup appears and asks whether the existing
file should be replaced or renamed.
NOTE:
Before the transfer of field data, a popup
appears and asks whether processed areas
should be transferred as well. If so, the
transfer process may take a few minutes.
NOTE:
The transferred data can then be seen in the
bottom display.

7.4.3 Transfer implement and field data from the USB stick to the terminal

Select and transfer individual data
VarioGuide
438.020.070.012
K
Fig. 34
7. Start-up
87