Select And Transfer All Data - FENDT varioguide Operator's Manual

7. Start-up
Press the soft key (I); individual data is
3.
transferred to the USB stick.
NOTE:
If there is identical data on the USB stick, a
popup appears and asks whether the existing
file should be replaced or renamed.
NOTE:
Before the transfer of field data, a popup
appears and asks whether processed areas
should be transferred as well. If so, the
transfer process may take a few minutes.
NOTE:
The transferred data can then be seen in the
bottom display.

7.4.2.1 Select and transfer all data

Procedure
Using the soft key, select the data to be
1.
transferred:
(A) Field data
(B) Implement data
86
I
Fig. 32
Fig. 33
A
B
H
VarioGuide
438.020.070.012