Marker Settings; Worked Area Settings - FENDT varioguide Operator's Manual

5. Map view

5.3.2 Marker settings

Marker selection
Press the softkey (C) in full-screen mode to open a
selection list featuring the markers set for the
field. You can change the names of existing
markers and delete existing markers in this list.
Fig. 7

5.3.3 Worked area settings

Fig. 8
(A) Worked areas
Activate/Deactivate
The area colored green on the map shows the processed area. This processed area is linked to the Trigger
Settings page in VarioDoc/VarioGuide. The processed area is displayed on the map depending on the way
in which the settings have been set and if they have been set at all.
50 VarioGuide
438.020.070.012