FENDT varioguide Operator's Manual page 147

Table of Contents

Advertisement

Fault
overlapping or
underlapping.
GNSS signal strength
insufficient to operate
automatic way line
guidance - fewer than
three bars of signal
strength.
VarioGuide
438.020.070.012
Possible cause:
Implement offset is set
incorrectly in the
terminal.
Correction signal not
available.
The license for receiving
the OmniSTAR
correction signal has
expired.
The license for receiving
the OmniSTAR
correction signal has
expired.
The GNSS position signal
is shadowed by trees or
buildings.
Failure of receiver.
Signal shadowing at the
edge of the field caused
by trees.
Signal shadowing caused
by operation on a slope.
Indication
Overlapping between the
first two runs.
Underlapping between
the next two runs.
A red cross appears in
field (B) of System info,
see
chapter 7.13.1
Check
system info/system
page 125.
status,
The expiry date is shown
as having been exceeded
on the Correction signal
page. A red cross
appears in field (B) of
System info, see
chapter 7.13.1
Check
system info/system
page 125.
status,
The expiry date is shown
as having been exceeded
on the Correction signal
page. A red cross
appears in field (B) of
System info, see
chapter 7.13.1
Check
system info/system
page 125.
status,
Restricted view of the
open sky.
A red cross appears in
field (I) of System info,
see
chapter 7.13.1
Check
system info/system
status,
page 125.
One to two bars of signal
strength are displayed at
the edge of the field.
Three bars or more are
displayed in the middle
of the field.
One to two bars of signal
strength are displayed on
the slope. Three bars or
8. Faults and remedy
Remedy
Adjust implement offset
in the terminal.
Check whether a valid
correction signal license
is available. Check
whether the correction
signal is shadowed (e.g.
at edges of forests, high-
voltage power lines etc.).
Order a new correction
signal license from
OmniSTAR. Contact your
Fendt dealer.
Order a new correction
signal license from
OmniSTAR. Contact your
Fendt dealer.
Drive away from the
shadowing.
Contact your FENDT
dealer.
Do not drive into
shadowing.
147

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the varioguide and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Varioguide novatelVarioguide trimble

Table of Contents

Save PDF