Rtk Network (Internal Gsm/Gprs Modem); Configure The Internal Mobile Modem Correction Signal (Gsm/Gprs) - FENDT varioguide Operator's Manual

Display
Distance to Base
Network ID
Signal format

7.10.2 RTK network (internal GSM/GPRS modem)

7.10.2.1 Configure the internal mobile modem correction signal (GSM/GPRS)

NOTE:
After the ignition has been switched OFF/ON, the system connects to the GSM/GPRS network
automatically and without further notice, provided that a connection was established before the ignition
was switched off. Please note that this action may result in data charges.
Set correction signal
Select the correction signal via the "Signal
1.
Type" selection field.
Select 'Internal Modem' as the modem type
2.
Select either 'GSM' or 'GPRS' as the
3.
connection type
Display
Satellite receiver
Signal type
Modem type
Connection type
Signal strength
Accuracy
VarioGuide
438.020.070.012
Distance in m
The signal format is displayed
Designation of the installed receiver
The correction signal source can be selected here
Internal modem
Dial connection (GSM) / Data connection GPRS
Mobile communications signal strength
Bar indicator and decimal value of static accuracy
Fig. 55
7. Start-up
107