Create Implement; Call Up Implement Settings On 7 - FENDT varioguide Operator's Manual

7.2 Create implement

7.2.1 Call up implement settings on 7"

Procedure
Fig. 7
Press the positioning button on the external control panel.
1.
Under "Management info", press the soft key for the on-board computer; "On-board computer" page
2.
is displayed.
On the "On-board computer" page, press the soft key for the trigger settings; "Trigger settings" page
3.
is displayed.
On the "Trigger settings" page, press the "Front-mounted implement" soft key; the "Implement
4.
settings" page is displayed.
VarioGuide
438.020.070.012
7. Start-up
67