Save Mounted Implement Data; Save Implement On Stopping - FENDT varioguide Operator's Manual

7. Start-up

7.3 Save mounted implement data

7.3.1 Save implement on stopping

NOTE:
This function can be used to save the current settings for an implement (incl. the implement settings and
the track distance from VarioGuide).
Save the current implement settings with the same name
If an implement has been loaded and one or more
settings then changed, the page shown opposite
appears when the engine is switched off.
• The current settings are saved under the same
name with the
• The terminal then switches off.
Save the current settings with a different name
Press softkey .
82
key.
Fig. 25
Fig. 26
VarioGuide
438.020.070.012