Headland Settings - FENDT varioguide Operator's Manual

7.16 Headland settings

7.16.1 Headland settings
NOTE:
Due to satellite drift, a field boundary recording and therefore the headland settings are only
appropriate from decimetre (DM) accuracy or with RTK (CM) accuracy.
Softkeys
(E) Headland settings
(F) AutoTI pre-activation (only possible within a
field boundary)
NOTE: Only possible with the Variotronic TI
automatic option and within a field boundary
VarioGuide
438.020.070.012
Fig. 90
7. Start-up
129