Setup Menu; What The Setup Menu Allows; How To Find The Setup Menu; Setting Date Format - 3M Clean-Trace NGi Luminometer User Manual

6.0 SETUP MENU
6.01 What the SETUP MENU allows
6.02 How to find the SETUP MENU
6.03 Setting Date Format
6.04 Setting the Date
6.05 Setting the Time
6.06 Setting the Language
6.07 Performing a Self Check
6.08 Setting the Backlight Timeout
6.01 What the SETUP MENU allows
The SETUP MENU allows:
• Format the date as shown below and format the time to 12/24 hour clock
• Set the current time and date
• Change the displayed language
• Check to see if the instrument performs within calibration limits
• Set the display backlight timeout period
6.02 How to find the SETUP MENU
From the MAIN MENU use the navigation (▲/▼) buttons to select SETUP MENU and Press
the Select button.
The SETUP MENU can now be seen.
6.03 Setting Date Format
While in the SETUP Menu, use the navigation (▲/▼) buttons to select DATE & TIME and
press the Select button. The DATE & TIME menu can now be seen.
The choice of date formats are:
DOW D M Y e.g. Wed 04 Jan 2012 12:31
DOW M D Y e.g. Wed Jan 04 2012 12:31
Y M D DOW e.g. 2012 Jan 04 Wed 12:31
Use the navigation (▲/▼) buttons to select DATE FORMAT and press the Change button
repeatedly until the required format is shown.
Press the Back button to return to the SETUP Menu or use the navigation (▲/▼) buttons to
select another item in the DATE & TIME menu.
MAIN MENU
Measure Sample
Program Mode
Review Results

Setup Menu

Wed 04 Jan 2012 10:09
SETUP MENU
Date & Time
Language
Self–check
Backlight Timeout
Wed 04 Jan 2012 10:09
Back
DATE & TIME
Set Date 04-Jan-12
Set Time 14:28:56
Date Format DOW D M Y
Wed 04 Jan 2012 10:09
Back
Select
Select
Select